Skip to product information
1 of 5

Neo Shop

Neo 7 - Spacer - M6 - 300 x 200 - 100 mm

Neo 7 - Spacer - M6 - 300 x 200 - 100 mm

Regular price $118.00 USD
Regular price Sale price $118.00 USD
Sale Sold out
Tax included. Shipping calculated at checkout.

Neo 7 Spacer for Beovision 7

Neo 7 Spacer brings your new TV right to the forefront - as before. Make the front edge of the TV and the Beolab 7 speaker flush so it looks like the Beovision 7.

This is how the Neo 7 Spacer works

The older B&O TV on the Beovision 7 stand was flush with the front edge of the Beolab 7 speaker. Newer TVs are not as deep - as the old Beovision 7 TV - so the front edge of the TV does not align with the front edge of the speaker. It's a matter of taste.

If you want it as before, then the Neo 7 Spacer is the answer. Now the front edge of the TV aligns with the front edge of the Beolab 7 speaker.

At the same time, you get a cavity behind the TV - where cables, Apple TV and other TV boxes can be hidden. You get a nice set-up without cable fiddling.

If you want to be sure that your TV is vertical, use the Neo Tilt Stop, read here

What are the dimensions of the Spacer and how does it fit the Beovision 7 stand

  • This Spacer is intended for a TV with VESA 300 x 200

  • VESA measurement of 300 mm in width

  • VESA measurement of 200 mm in height

  • The depth is 100 mm. It moves the front of the TV 100 mm forward

  • The product fits on a Beovision 7 stand

  • There is 6 mm thread thickness on spacers

  • Note - the spacers have a thread length of 10 mm. Check that the VESA holes in your TV are not so deep that you have a problem with the thread length.

How do I choose the right Neo 7 Spacer

VESA is a standard for hanging TVs - but then the standardization also ends. VESA is typically stated as 300 x 200 or 300 x 300. These are the measurements between the holes on the back of the TV, where the bracket is attached. The measurements are in millimeters, so VESA 300 x 200 means that there are 300 mm between the holes (e.g. in width) and 200 mm (e.g. in height).

But the standard for VESA does not say anything about where the holes are located on the TV. They can sit very low (if the TV has electronics at the bottom) or they can sit high.

You can get help here to find the right VESA plate

The VESA measurements determine which Spacer you should have. You must remember to decide how far forward the front of your TV should be. All TVs have different thicknesses, so our products vary in distance / depth. You should therefore expect the product to come as close to the front edge of the Beolab 7 speaker as possible.

What is included in the Neo 7 Spacer package

Spacers, cover plate and mounting screws for the VESA plate are included. 

View full details