Renew your B&O equipment with Neo technology - we help you on your way - experience the joy again

Products

30 products

  • Antenne stik - Omformer fra F stik til coax hun stik

    Antenne stik - Omformer fra F stik til coax hun stik

    5 in stock

    Et lille konverterings stik for at lave et antennekabel med F-stik om til et coax hun stik. Neo Radio anvender coax hun stik. Hvis du allerede har et antennekabel med F-stik i begge ender, så kan det anvendes mellem Neo Radio og dit B&O produkt, hvis du løber denne lille konverterings stik.

    5 in stock

    69,00 kr

  • Antennekabel - F stik til coax hun - 1.5 meter - 75 ohm

    Antennekabel - F stik til coax hun - 1.5 meter - 75 ohm

    17 in stock

    Dette kabel anvendes mellem Neo Radio og dit B&O produkt.  Coax hun stikket passer til dit B&O produkt (eks Beosound 4 eller Beocenter 2).  F stikket passer til Neo Radio.  Et kvalitetskabel med stor støj dæmpning.  Kablet har en længde på 1,5 meter og er hvid.

    17 in stock

    39,00 kr

  • Antennekabel - F stik til coax hun - 2.5 meter - 75 ohm

    Antennekabel - F stik til coax hun - 2.5 meter - 75 ohm

    9 in stock

    Dette kabel anvendes mellem Neo Radio og dit B&O produkt.  Coax hun stikket passer til dit B&O produkt (eks Beosound 4 eller Beocenter 2).  F stikket passer til Neo Radio.  Et kvalitetskabel med stor støj dæmpning.  Kablet har en længde på 2,5 meter og er hvid.

    9 in stock

    49,00 kr

  • Out of stock

    3.795,00 kr

  • Beolab 7.2 - Black - Refurbised

    Beolab 7.2 - Black - Refurbised

    1 in stock

    Beolab 7.2 er en af verdens bedste soundbar til TV. Har du oplevet, at overfladen på din Beolab 7.2 har mistet glansen og overfladen krakelerer - så er der hjælp at hente. Neomesteren hjælper dig med en total renoveret Beolab 7.2. Den har været helt adskilt på vores service værksted og kabinettet har været forbi en professionel industri-lakering. Kabinettet fremstår helt nyt igen med en flot sort pulverlakering. Elektronikken er gennemgået og renoveret, alle højttalere er efterset og der er kommet nye dele i, hvis det har været nødvendig. Se bare forskellen - nu kan støj og skidt ikke sidde fast på overfladen og højttaleren fremstår som ny igen. Elegant og flot til dit nye TV. Bemærk - vi tager din brugte Beolab 7.2 i bytte for 1.000 DKK - og forventer at den virker og ikke er bulet i front gitter.

    1 in stock

    3.995,00 kr

  • Out of stock

    3.795,00 kr

  • Neo 7.32 Plate - VESA 200 x 300 - for Neo products

    Beovision 7.32 stand - VESA plate 200 x 300 - M6 screw

    5 in stock

    This VESA plate / adapter is specially designed to mount on a floor stand, wall holder or table stand from Beovision 7-32 or Beovision 6. Remove the current B&O TV by loosening 2 screws. Mount the VESA 200 (M6) plate (bracket) on your TV and then mount the plate with the TV on the stand. How to choose the right VESA plate - click here How to install the VESA plate on the BV 7-32 stand - click here The VESA plate has 200 mm hole spacing on the side and has holes intended for 6 mm screws (M6) on your TV. The VESA plate also has a height distance of 300 mm, where the hole distance jumps by 25 mm. The product is prepared for mounting the BM 7 Adapter, where holes have been prepared. A bag with 4 M6 screws (6 mm), 4 spacers of 10 mm for mounting between the TV and the plate and 2 M5 (5 mm) screws for mounting the BM 7 Adapter on the VESA plate is included. The VESA plate has 200 mm hole spacing on the side and has holes intended for 6 mm screws (M6) on your TV. The VESA plate also has a height distance of 300 mm, where the hole distance jumps by 25 mm.

    5 in stock

    695,00 kr

  • VESA 200 x 300 for Beovision 7.32 stand - Bang & Olufsen

    Beovision 7.32 stand - VESA plate 200 x 300 - M8 screw (Samsung)

    3 in stock

    This VESA plate / adapter is specially designed to mount on a floor stand, wall holder or table stand from Beovision 7-32 or Beovision 6. Remove the current B&O TV by loosening 2 screws. Mount the VESA 200 (M8) plate on your TV and then mount the plate with the TV on the stand. How to choose the right VESA plate - click here How to install the VESA plate on the BV 7-40 stand - click here The VESA plate has 200 mm hole spacing on the side and has holes intended for 8 mm screws (M8) on your TV. The VESA plate also has a distance of 300 mm in height, where the hole distance jumps by 25 mm. The product is prepared for mounting the BM 7 Adapter, where holes have been prepared. A bag with 4 M8 screws (8 mm), 4 spacers of 10 mm for mounting between the TV and the plate and 2 M5 (5 mm) screws for mounting the BM 7 Adapter on the VESA plate is included.

    3 in stock

    695,00 kr

  • Neo 7.32 Plate - Beovision 7-32 - VESA 200/300 x 350

    Beovision 7.32 stand - VESA plate 200/300 x 300 - M6 screw

    5 in stock

    This VESA plate / adapter is specially designed to mount on a floor stand, wall holder or table stand from Beovision 7-32 or Beovision 6. Remove the current B&O TV by loosening 2 screws. Mount the VESA 300 (M6) plate (bracket) on your TV and then mount the plate with the TV on the stand. How to choose the right VESA plate - click here How to install the VESA plate on the BV 7-32 stand - click here The VESA plate has 300 mm hole spacing on the side and has holes intended for 6 mm screws (M6) on your TV. The VESA plate also has a distance of 300 mm in height, where the hole distance jumps by 25 mm. The product is prepared for mounting the Neo 7 Adapter, where holes have been prepared. A bag with 4 M6 screws (6 mm), 4 spacers of 10 mm for mounting between the TV and the plate and 2 M5 (5 mm) screws for mounting the BM 7 Adapter on the VESA plate is included.

    5 in stock

    749,00 kr

  • Neo 7.32 Plate - VESA 200/300x350 - Beovision 7-32

    Beovision 7.32 stand - VESA plate 200/300 x 300 - M8 screw (Samsung)

    2 in stock

    This VESA plate / adapter is specially designed to mount on a floor stand, wall holder or table stand from Beovision 7-32 or Beovision 6. Remove the current B&O TV by loosening 2 screws. Mount the VESA 300 (M8) plate on your TV and then mount the plate with the TV on the stand. How to choose the right VESA plate - click here How to install the VESA plate on the BV 7-40 stand - click here The VESA plate has 200 and 300 mm hole spacing on the side and has holes intended for 8 mm screws (M8) on your TV. The VESA plate also has a distance of 300 mm in height, where the hole distance jumps by 25 mm. The product is prepared for mounting the Neo 7 Adapter, where holes have been prepared. A bag with 4 M8 screws (8 mm), 4 spacers of 10 mm for mounting between the TV and the plate and 2 M5 (5 mm) screws for mounting the Neo 7 Adapter on the VESA plate is included.

    2 in stock

    749,00 kr

  • Neo 7.40 Plate - VESA 200/300 x 350 - Beovision 7.40

    Beovision 7.40 stand - VESA plate 200/300 x 350 - M6 screw

    2 in stock

    This VESA plate / adapter is specially designed to mount on a floor stand, wall holder or table stand from the Beovision 7-40 series. Remove the current B&O TV by loosening 2 screws. Mount the VESA 300 (M6) plate (bracket) on your TV and then mount the plate with the TV on the stand. How to choose the right VESA plate - click here How to install the VESA plate on the BV 7-40 stand - click here The VESA plate has both 200 mm and 300 mm hole spacing in width and has holes intended for 6 mm screws (M6) for fastening to your TV. The VESA plate also has a distance of 350 mm in height with steps of 25 mm, so that the height can be adjusted. The product is prepared for mounting the Neo 7 Adapter, where holes have been prepared. A bag with 4 M6 screws (6 mm), 4 spacers of 10 mm for mounting between the TV and the plate and 2 M5 (5 mm) screws for mounting the BM 7 Adapter on the VESA plate is included.

    2 in stock

    795,00 kr

  • Neo 7.40 Plate - VESA 200/300 x 350 - Beovision 7.40

    Beovision 7.40 stand - VESA plate 200/300 x 350 - M8 screw (Samsung)

    1 in stock

    This VESA plate / adapter is specially designed to mount on a floor stand, wall holder or table stand from the Beovision 7-40 series. Remove the current B&O TV by loosening 2 screws. Mount the VESA 300 (M8) plate on your TV and then mount the plate with the TV on the stand. How to choose the right VESA plate - click here How to install the VESA plate on the BV 7-40 stand - click here The VESA bracket has both 200 mm and 300 mm hole spacing on the side and has holes designed for 8 mm screws (M8) for fastening to your TV The VESA plate also has a distance of 350 mm in height with steps of 25 mm, so that the height can be adjusted. The product is prepared for mounting the Neo 7 Adapter, where holes have been prepared. A bag with 4 M8 screws (8 mm), 4 spacers of 10 mm for mounting between the TV and the plate and 2 M5 (5 mm) screws for mounting the Neo 7 Adapter on the VESA plate is included.

    1 in stock

    795,00 kr

Login

Forgot your password?

Don't have an account yet?
Create account