Renew your B&O equipment with Neo technology - we help you on your way - experience the joy again

Neo 7 - Produkter

20 products

  • Neo 7 Adapter til Beovision 7 stand - monter nyt TV

    Neo 7 Adapter (R1)

    Out of stock

    Let Beovision 7 come back to life - update the TV with a brand new television and control it all with your B&O remote control - just like it was new again.Read more hereMount the innovative and newly developed Neo 7 Adapter between the TV and the Beovision 7 stand.Note - The software supports TVs from LG, Samsung, Loewe, Philips, Sony and Panasonic.Connect the cables - you're ready (cables can be purchased here in the Neo Shop)You can now turn the stand and tilt the TV as well as operate the television - all with a B&O remote control.Mount your new TV with a specially designed VESA bracket - directly on the Beovision 7 stand (either floor, wall or table).This VESA plate is specially designed to mount on a floor stand, wall holder or table stand from the Beovision 7 series.Remove the current B&O TV by loosening 2 screws. Mount the VESA plate on your TV and then mount the plate with the TV on the stand. Remember to tighten the 2 screws, which ensure that the TV does not fall to the floor.The package contains an adapter box and a power supply.

    Out of stock

    2.495,00 kr

  • Optical toslink kabel til Neo TV eller Neo 7 Adapter

    Digital optical toslink audio cable - 0.75 m

    159 in stock

    This is an optical toslink fiber optic cable for connecting the Neo 7 Adapter or Neo TV and your TV. If you do not have a similar cable, then you must buy this, otherwise you will not be able to get the sound transferred from the TV to the Neo 7 Adapter or Neo TV

    159 in stock

    49,00 kr

  • Power Link Cable - Black - Male to RJ45 - 0.5 m

    Power Link Cable - Black - Male to RJ45 - 0.5 m

    165 in stock

    The Powerlink cable is used to connect B&O systems primarily with loudspeakers. This cable gives you 1 RJ45 plug and 1 8-pin male power link. The products from NeoMesteren use RJ45 connectors. The cables are of high quality and fully assembled. You will not experience noise with our cables, as they are noise-proof. The color is black. Bang & Olufsen has for many years used Power Link cables between the products. The Neo Master also uses Power Link cables between the Neo products and the B&O products. If you therefore have Power Link cables from before, they can be used again. It is, however, that B&O at one point chose to switch from the 8-pole DIN cable to RJ45 connectors. You must therefore be aware of which types of plugs are to be used.

    165 in stock

    109,00 kr

  • Neo 7.40 Plate - VESA 200/300 x 350 - Beovision 7.40

    Beovision 7.40 stand - VESA plate 200/300 x 350 - M6 screw

    2 in stock

    This VESA plate / adapter is specially designed to mount on a floor stand, wall holder or table stand from the Beovision 7-40 series. Remove the current B&O TV by loosening 2 screws. Mount the VESA 300 (M6) plate (bracket) on your TV and then mount the plate with the TV on the stand. How to choose the right VESA plate - click here How to install the VESA plate on the BV 7-40 stand - click here The VESA plate has both 200 mm and 300 mm hole spacing in width and has holes intended for 6 mm screws (M6) for fastening to your TV. The VESA plate also has a distance of 350 mm in height with steps of 25 mm, so that the height can be adjusted. The product is prepared for mounting the Neo 7 Adapter, where holes have been prepared. A bag with 4 M6 screws (6 mm), 4 spacers of 10 mm for mounting between the TV and the plate and 2 M5 (5 mm) screws for mounting the BM 7 Adapter on the VESA plate is included.

    2 in stock

    795,00 kr

  • Beolab 7.2 - Black - Refurbised

    Beolab 7.2 - Black - Refurbised

    1 in stock

    Beolab 7.2 er en af verdens bedste soundbar til TV. Har du oplevet, at overfladen på din Beolab 7.2 har mistet glansen og overfladen krakelerer - så er der hjælp at hente. Neomesteren hjælper dig med en total renoveret Beolab 7.2. Den har været helt adskilt på vores service værksted og kabinettet har været forbi en professionel industri-lakering. Kabinettet fremstår helt nyt igen med en flot sort pulverlakering. Elektronikken er gennemgået og renoveret, alle højttalere er efterset og der er kommet nye dele i, hvis det har været nødvendig. Se bare forskellen - nu kan støj og skidt ikke sidde fast på overfladen og højttaleren fremstår som ny igen. Elegant og flot til dit nye TV. Bemærk - vi tager din brugte Beolab 7.2 i bytte for 1.000 DKK - og forventer at den virker og ikke er bulet i front gitter.

    1 in stock

    3.995,00 kr

  • Power Link Cable - RJ45 to Female DIN x 2 - Black - For B&O and Neo products

    Power Link Cable - Black - Y-adapter to RJ45

    166 in stock

    This quality Power Link cable connects the products to the speakers. The cable has 2 pcs 8-pole female power link and 1 pcs RJ45 plug. The cable is ideal for sending the sound to 2 speakers. The products from NeoMesteren use RJ45 connectors.

    166 in stock

    119,00 kr

  • Neo 7.40 Plate for Beovision 7-40 from Bang & Olufsen

    Beovision 7.40 stand - VESA plate 400 x 550 - M6 screw

    2 in stock

    This VESA plate is specially designed to mount on a floor stand, wall holder or table stand from the Beovision 7-40 series. Remove the current B&O TV by loosening 2 screws. Mount the VESA 400 H (M6) plate on your TV and then mount the plate with the TV on the stand. How to choose the right VESA plate - read here How to install the VESA plate on the BV 7-40 stand - read here The VESA bracket has both 200, 300 and 400 mm hole distance on the side and has holes intended for 8 mm or 6 mm screws (M8 or M6) for fastening on your TV and the VESA plate also has a 550 mm distance in height with a jump of 25 mm , so that the height can be adjusted. The plate is intended for the larger TVs such as the 55", 65" and 70" series. The product is prepared for mounting the Neo 7 Adapter, where holes have been prepared. A bag with 4 M6 screws (6 mm), 4 spacers of 10 mm for mounting between the TV and the plate and 2 M5 (5 mm) screws for mounting the Neo 7 Adapter on the VESA plate is included.

    2 in stock

    1.095,00 kr

  • Power Link Cable - 2 x Female and 1 x Male - For B&O and Neo products

    Power Link Cable - Black - Y-adapter - Male and 2 x Female

    170 in stock

    Power Link cable, Y-adapter - male and 2 x female connectors The Powerlink cable is used to connect B&O systems together - primarily with speakers. The cables are of high quality and fully assembled.

    170 in stock

    129,00 kr

  • Neo 7.32 Plate - Beovision 7-32 - VESA 200/300 x 350

    Beovision 7.32 stand - VESA plate 200/300 x 300 - M6 screw

    5 in stock

    This VESA plate / adapter is specially designed to mount on a floor stand, wall holder or table stand from Beovision 7-32 or Beovision 6. Remove the current B&O TV by loosening 2 screws. Mount the VESA 300 (M6) plate (bracket) on your TV and then mount the plate with the TV on the stand. How to choose the right VESA plate - click here How to install the VESA plate on the BV 7-32 stand - click here The VESA plate has 300 mm hole spacing on the side and has holes intended for 6 mm screws (M6) on your TV. The VESA plate also has a distance of 300 mm in height, where the hole distance jumps by 25 mm. The product is prepared for mounting the Neo 7 Adapter, where holes have been prepared. A bag with 4 M6 screws (6 mm), 4 spacers of 10 mm for mounting between the TV and the plate and 2 M5 (5 mm) screws for mounting the BM 7 Adapter on the VESA plate is included.

    5 in stock

    749,00 kr

  • Neo 7 Plate - Beovision 7-40 stand - VESA 400x550

    Beovision 7.40 stand - VESA plate 400 x 550 - M8 screw (Samsung)

    2 in stock

    VESA plate for Beovision 7-40 stand. Attach large TVs such as 65" - 77" and more. The VESA 400H plate is designed to mount on a stand from the Beovision 7-40 series. The plate is intended for the larger TVs such as the 55″, 65″ and 70″ series

    2 in stock

    1.095,00 kr

  • Power Link kabel - 1 meter - til B&O produkter

    Power Link Cable - Black - 1 m

    191 in stock

    The Powerlink cable is used to connect B&O systems together with primarily loudspeakers. The cable is 1 meter long and has an 8-pin male plug at both ends. The cables are of high quality and fully assembled. You will not experience noise with our cables, as they are noise-proof. The color is black.

    191 in stock

    119,00 kr

  • Neo 7.40 Plate - VESA 200/300 x 350 - Beovision 7.40

    Beovision 7.40 stand - VESA plate 200/300 x 350 - M8 screw (Samsung)

    1 in stock

    This VESA plate / adapter is specially designed to mount on a floor stand, wall holder or table stand from the Beovision 7-40 series. Remove the current B&O TV by loosening 2 screws. Mount the VESA 300 (M8) plate on your TV and then mount the plate with the TV on the stand. How to choose the right VESA plate - click here How to install the VESA plate on the BV 7-40 stand - click here The VESA bracket has both 200 mm and 300 mm hole spacing on the side and has holes designed for 8 mm screws (M8) for fastening to your TV The VESA plate also has a distance of 350 mm in height with steps of 25 mm, so that the height can be adjusted. The product is prepared for mounting the Neo 7 Adapter, where holes have been prepared. A bag with 4 M8 screws (8 mm), 4 spacers of 10 mm for mounting between the TV and the plate and 2 M5 (5 mm) screws for mounting the Neo 7 Adapter on the VESA plate is included.

    1 in stock

    795,00 kr

Neovision 7

Login

Forgot your password?

Don't have an account yet?
Create account