B&O Powerlink cable for Neo products with DIN 8 pin

Powerlink cable in black with a length of 0.1 meters with DIN 8 pin female connectors at both ends. The cable is a Mk2 type.

The Powerlink cable is used to connect B&O systems primarily with speakers.

Cable data

• The cable is 0.1 meters long
  
  
• DIN 8 pin female connectors at both ends
  
  
• The cable has 8 internal wires with shielding around them. See more below
  
  
• The color is black.

Read details about the cable here

Technical details about the DIN 8 Powerlink cable

The Powerlink cable contains 8 wires, of which 2 pairs are twisted and shielded (right and left channel), 1 wire is shielded (data traffic), and one wire for the Overload signal. The entire cable is shielded as one.

The cable is typically used for speakers with displays. These are B&O speakers such as BeoLab 3000, BeoLab 4500, BeoLab 5000, Penta MK II, and Penta MK III.

The cable is also used for amplifiers such as ML/MCL Converter and BeoLink Passive.

The above speakers and amplifiers must use specific wires in the cable. Pin 6 on the connector is a Data pin, which is required to use the display on the speaker. Pin 1 on the connector is the power on/off for the speaker, and finally, pin 8 is the overload detection on the amplifiers.