Neo 7 Spacer for Beovision 7

Neo 7 Spacer brings your new TV right to the forefront - like Beovision. Make the front edge of the TV and the Beolab 7 speaker flush so it looks like the Beovision 7.

This is how Neo 7 Spacer works

The older B&O TV on the Beovision 7 stand was flush with the front edge of the Beolab 7 speaker. Newer TVs are not as deep - as the old Beovision 7 TV - so the front edge of the TV does not align with the front edge of the speaker. It's a matter of taste.

How to choose the right Neo Spacer for your TV on a Beovision 7 stand

If you want it as before, then Neo 7 Spacer is the answer. Now the front edge of the TV aligns with the front edge of the Beolab 7 speaker.

At the same time, you get a cavity behind the TV - where cables, Apple TV and other TV boxes can be hidden. You get a nice set-up without cable fiddling.

If you want to be sure that your TV is vertical, use the Neo Tilt Stop, read here

https://shop.neomesteren.dk/products/neo-7-tilt-stop-beovision-7-40

What are the dimensions of the Spacer and how does it fit the Beovision 7 stand

• This Spacer is intended for a TV with VESA 200 x 200
  
  
• VESA measurement of 200 mm in width
  
  
• VESA measurement of 200 mm in height
  
  
• The depth is 130 mm. It moves the front of the TV 130 mm forward
  
  
• The product fits on a Beovision 7 stand
  
  
• There are both 6 mm thread thickness on spacers and 8 mm (for Samsung)
  
  
• Note - the spacers have a thread length of 10 mm on M6 and 12 mm on M8 (Samsung). Check that the VESA holes in your TV are not so deep that you have a problem with the thread length.
  
  
• Longer threads can be requested (contact us). Some Samsung TVs have the VESA holes very deep in the cabinet.

How do I choose the right Neo 7 Spacer

VESA is a standard for hanging TVs - but then the standardization also ends. VESA is typically stated as 300 x 200 or 300 x 300. These are the measurements between the holes on the back of the TV, where the bracket is attached. The measurements are in millimeters, so VESA 300 x 200 means that there are 300 mm between the holes (e.g. in width) and 200 mm (e.g. in height).

But the standard for VESA does not say anything about where the holes are located on the TV. They can sit very low (if the TV has electronics at the bottom) or they can sit high.

You can get help here to find the right VESA plate

How to choose the right VESA plate and Spacer for your TV

The VESA measurements determine which Spacer you need for your Beovision stand. You must remember to decide how far forward the front of your TV should be. All TVs have different thicknesses, so our products vary in distance / depth. You should therefore expect the product to come as close to the front edge of the Beolab 7 speaker as possible.

What is included in the package for the Neo 7 Spacer for your Beovision stand

Spacers, cover plate and mounting screws for the VESA plate are included - see details above.