Neo 7 Spacer for Beovision 7
The Neo 7 Spacer brings your new TV right to the front edge, like the Beovision. Align the front edge of the TV with the Beolab 7 speaker to make it look like a Beovision 7.
How the Neo 7 Spacer works
The older B&O TV on the Beovision 7 stand was aligned with the front edge of the Beolab 7 speaker. Newer TVs are not as deep as the old Beovision 7 TV, so the front edge of the TV does not align with the front edge of the speaker. It’s a matter of taste.
How to choose the right Neo Spacer for your TV on a Beovision 7 stand
If you want it like before, the Neo 7 Spacer is the answer. Now the front edge of the TV is aligned with the front edge of the Beolab 7 speaker.
At the same time, you get a space behind the TV where cables, Apple TV, and other TV boxes can be hidden. You get a neat setup with no cable clutter.
To make sure your TV stands vertically, use Neo Tilt Stop; read more here
https://shop.neomesteren.dk/products/neo-7-tilt-stop-beovision-7-40
What are the dimensions of the Spacer, and how does it fit the Beovision 7 stand?
- This Spacer is designed for a TV with VESA 400 x 300
- VESA measurement of 400 mm in width
- VESA measurement of 300 mm in height
- The depth is 130 mm. It moves the front of the TV 130 mm forward
- The product fits a Beovision 7 stand
- The spacers are available with both 6 mm and 8 mm thread diameters (for Samsung).
- Note - the spacers have a thread length of 10 mm for M6 and 12 mm for M8 (Samsung). Check that the VESA holes on your TV are not so deep that the thread length causes a problem.
- Longer threads can be requested (contact us). Some Samsung TVs have VESA holes that are very deep inside the cabinet.
How do I choose the right Neo 7 Spacer
VESA is a standard for mounting TVs - but that is where standardization ends. VESA is typically specified as 300 x 200 or 300 x 300. These are the distances between the holes on the back of the TV where the bracket is attached. The measurements are in millimeters, so VESA 300 x 200 means there are 300 mm between the holes (e.g. horizontally) and 200 mm (e.g. vertically).
But the VESA standard does not specify where the holes are positioned on the TV. They can be very low (if the TV has electronics at the bottom) or they can be high up.
You can get help here finding the right VESA plate
How to choose the right VESA plate and Spacer for your TV
The VESA dimensions determine which Spacer you need for your Beovision stand. Remember to consider how far forward you want the front of your TV to sit. TVs vary in thickness, so our products come in different offsets/depths. You should therefore expect the product to bring the TV as close as possible to the front edge of the Beolab 7 speaker.
What’s included with the Neo 7 Spacer for your Beovision stand
Spacers, a cover plate, and mounting screws for the VESA plate are included - see details above.
