Neo 7 Spacer for Beovision 7
The Neo 7 Spacer brings your new TV right to the front edge - as before. Align the front edge of the TV with the Beolab 7 speaker so it resembles Beovision 7.
How the Neo 7 Spacer works
The older B&O TV on the Beovision 7 stand was flush with the front edge of the Beolab 7 speaker. Newer TVs are not as deep as the old Beovision 7 TV, so the front edge of the TV is not flush with the front edge of the speaker. It is a matter of taste.
How to choose the right Neo Spacer for your TV on a Beovision 7 stand
If you want it as before, the Neo 7 Spacer is the answer. Now the front edge of the TV is flush with the front edge of the Beolab 7 speaker.
At the same time, you get a cavity behind the TV where cables, Apple TV, and other TV boxes can be hidden. You get an attractive setup without cable clutter.
If you want to make sure your TV stands vertically, use Neo Tilt Stop; read more here
https://shop.neomesteren.dk/products/neo-7-tilt-stop-beovision-7-40
What are the dimensions of the Spacer, and how does it fit the Beovision 7 stand
- This Spacer is intended for a TV with VESA 300 x 200
- VESA measurement of 300 mm in width
- VESA measurement of 200 mm in height
- The depth is 100 mm. It moves the front of the TV 100 mm forward
- The product fits a Beovision 7 stand
- The box contains both 6 mm threaded spacers and 8 mm (Samsung) threaded rods
- Please note - the spacers have a thread length of 10 mm (M6) and 12 mm (M8). Check that the VESA holes in your TV are not positioned so deep that the thread length causes a problem.
- Threaded rods with longer threads can be supplied upon request. Some Samsung TVs have the holes positioned deep inside the cabinet.
How do I choose the right Neo 7 Spacer
VESA is a standard for mounting TVs - but that is where the standardization ends. VESA is typically specified as 300 x 200 or 300 x 300. These are the measurements between the holes on the back of the TV where the bracket is attached. The measurements are in millimeters, so VESA 300 x 200 means that there are 300 mm between the holes (e.g. in width) and 200 mm (e.g. in height).
However, the VESA standard does not specify where the holes are located on the TV. They may be very low (if the TV has electronics at the bottom) or they may be high.
You can get help here finding the right VESA plate
https://neomesteren.dk/saadan-vaelger-du-den-rigtige-vesa-plade
The VESA measurements determine which Spacer you need. Remember to consider how far forward the front of your TV should be. All TVs have different thicknesses, so our products vary in spacing/depth. You should therefore expect the product to come as close as possible to the front edge of the Beolab 7 speaker.
What is included in the package for the Neo 7 Spacer
Spacers, a cover plate, and mounting screws for the VESA plate are included.
