Neo 7 Spacer for Beovision 7
The Neo 7 Spacer brings your new TV all the way forward to the front edge, like before. Align the front edge of the TV with the Beolab 7 speaker to recreate the look of the Beovision 7.
How the Neo 7 Spacer works
The older B&O TV on the Beovision 7 stand was aligned with the front edge of the Beolab 7 speaker. Newer TVs aren’t as deep as the old Beovision 7 TV, so the front edge of the TV doesn’t align with the front edge of the speaker. It’s a matter of taste.
How to choose the right Neo Spacer for your TV on a Beovision 7 stand
If you want it like before, the Neo 7 Spacer is the answer. Now the front edge of the TV aligns with the front edge of the Beolab 7 speaker.
At the same time, you get a cavity behind the TV where cables, Apple TV, and other TV boxes can be hidden. You get a neat setup with no cable clutter.
If you want to make sure your TV stands vertically, use Neo Tilt Stop. Read more here
https://shop.neomesteren.dk/products/neo-7-tilt-stop-beovision-7-40
What are the dimensions of the Spacer, and how does it fit the Beovision 7 stand?
- This Spacer is designed for a TV with VESA 300 x 200
- VESA measurement of 300 mm in width
- VESA measurement of 200 mm in height
- The depth is 100 mm. It moves the front of the TV 100 mm forward
- The product fits a Beovision 7 stand
- The box includes both spacers with 6 mm threads and 8 mm (Samsung) threaded rods
- Note - the spacers have a thread length of 10 mm (M6) and 12 mm (M8). Check that the VESA holes in your TV aren’t so recessed that the thread length will be a problem.
- Threaded rods with longer threads can be supplied on request. Some Samsung TVs have holes that are recessed deep into the cabinet.
How do I choose the right Neo 7 Spacer
VESA is a standard for mounting TVs - but that’s where the standardization ends. VESA is typically specified as 300 x 200 or 300 x 300. These are the measurements between the holes on the back of the TV where the bracket is attached. The measurements are in millimeters, so VESA 300 x 200 means that there are 300 mm between the holes (e.g., in width) and 200 mm (e.g., in height).
But the VESA standard doesn’t specify where the holes are located on the TV. They can be very low down (if the TV has electronics at the bottom) or high up.
You can get help here finding the right VESA plate
https://neomesteren.dk/saadan-vaelger-du-den-rigtige-vesa-plade
The VESA measurements determine which Spacer you need. Remember to consider how far forward the front of your TV should sit. TVs vary in thickness, so our products come in different spacings/depths. You should therefore expect the product to bring the TV as close as possible to the front edge of the Beolab 7 speaker.
What’s included with the Neo 7 Spacer
Spacers, a cover plate, and mounting screws for the VESA plate are included.
