Neo 7 Spacer for Beovision 7

Neo 7 Spacer brings your new TV all the way forward to the front edge - as before. Make the front edge of the TV and Beolab 7 speaker flush, so it looks like Beovision 7.

This is how Neo 7 Spacer works

The older B&O TV on the Beovision 7 stand was flush with the front edge of the Beolab 7 speaker. Newer TVs are not as deep - like the old Beovision 7 TV - so the front edge of the TV is not flush with the front edge of the speaker. It's a matter of taste.

How to choose the right Neo Spacer for your TV on a Beovision 7 stand

If you want it as before, then Neo 7 Spacer is the answer. Now the front edge of the TV aligns with the front edge of the Beolab 7 speaker.

At the same time, you get a cavity behind the TV - where cables, Apple TV, and other TV boxes can be hidden. You get a neat setup without cable clutter.

If you want to be sure your TV stands upright, use Neo Tilt Stop, read here

https://shop.neomesteren.dk/products/neo-7-tilt-stop-beovision-7-40

What are the dimensions of the Spacer and how does it fit the Beovision 7 stand

• This Spacer is designed for a TV with VESA 300 x 200
  
  
• VESA measurement of 300 mm in width
  
  
• VESA measurement of 200 mm in height
  
  
• The depth is 100 mm. It moves the TV's front 100 mm forward
  
  
• The product fits on a Beovision 7 stand
  
  
• There are both 6 mm thread thickness on the spacers and 8 mm (Samsung) threaded rods in the box
  
  
• Note - the spacers have a thread length of 10 mm (M6) and 12 mm length (M8). Check that the VESA holes in your TV are not so deep that you have a problem with the thread length.
  
  
• Threaded rods with longer threads can be supplied on request. Some Samsung TVs have holes that sit deep in the cabinet.

How do I choose the right Neo 7 Spacer

VESA is a standard for mounting TVs - but that is where the standardization ends. Typically, VESA is specified as 300 x 200 or 300 x 300. These are the measurements between the holes on the back of the TV where the bracket is attached. The measurements are in millimeters, so VESA 300 x 200 means there are 300 mm between the holes (e.g., width) and 200 mm (e.g., height).

But the VESA standard does not specify where the holes are located on the TV. They can be very low (if the TV has electronics at the bottom) or they can be high.

You can get help here to find the right VESA plate

https://neomesteren.dk/saadan-vaelger-du-den-rigtige-vesa-plade

The VESA dimensions determine which Spacer you need. You must remember to consider how far forward the front of your TV should be. All TVs have different thicknesses, so our products vary in distance/depth. Therefore, you should expect the product to come as close to the front edge of the Beolab 7 speaker as possible.

What is included in the package for Neo 7 Spacer

Included are spacers, cover plate, and mounting screws for the VESA plate.