Neo 7 Spacer for Beovision 7
The Neo 7 Spacer brings your new TV all the way forward to the front edge - like the Beovision. Align the front edge of the TV with the Beolab 7 speaker to make it look like a Beovision 7.
How the Neo 7 Spacer works
The older B&O TV on the Beovision 7 stand was flush with the front edge of the Beolab 7 speaker. Newer TVs aren’t as deep as the old Beovision 7 TV, so the front edge of the TV isn’t flush with the front edge of the speaker. It’s a matter of taste.
How to choose the right Neo Spacer for your TV on a Beovision 7 stand
If you want it the way it was before, the Neo 7 Spacer is the answer. Now the front edge of the TV is flush with the front edge of the Beolab 7 speaker.
At the same time, you get a cavity behind the TV where cables, Apple TV and other TV boxes can be hidden. You get a neat setup without cable clutter.
To make sure your TV stands vertically, use Neo Tilt Stop. Read more here
https://shop.neomesteren.dk/products/neo-7-tilt-stop-beovision-7-40
What are the dimensions of the Spacer, and how does it fit the Beovision 7 stand?
- This Spacer is designed for a TV with VESA 200 x 200
- VESA measurement of 200 mm in width
- VESA measurement of 200 mm in height
- The depth is 100 mm. It moves the front of the TV 100 mm forward
- The product fits a Beovision 7 stand
- The spacers are available with both 6 mm and 8 mm thread thickness (for Samsung)
- Note - the spacers have a thread length of 10 mm for M6 and 12 mm for M8 (Samsung). Check that the VESA holes in your TV are not so deep that you have a problem with the thread length.
- Longer threads are available on request (contact us). Some Samsung TVs have the VESA holes set very deep into the casing.
How do I choose the right Neo 7 Spacer
VESA is a standard for mounting TVs - but that’s where the standardization ends. VESA is typically specified as 300 x 200 or 300 x 300. These are the measurements between the holes on the back of the TV where the bracket is attached. The measurements are in millimeters, so VESA 300 x 200 means that there are 300 mm between the holes (e.g. horizontally) and 200 mm (e.g. vertically).
But the VESA standard doesn’t specify where the holes are positioned on the TV. They can be very low (if the TV has electronics at the bottom) or they can be high up.
You can get help here finding the right VESA plate
How to choose the right VESA plate and Spacer for your TV
The VESA measurements determine which Spacer you need for your Beovision stand. Remember to consider how far forward you want the front of your TV to sit. All TVs have different thicknesses, so our products vary in spacing/depth. You should therefore expect the product to bring the TV as close as possible to the front edge of the Beolab 7 speaker.
What’s included with the Neo 7 Spacer for your Beovision stand
Spacers, a cover plate and mounting screws for the VESA plate are included - see details above.
