Neo 7 Spacer for Beovision 7
The Neo 7 Spacer brings your new TV all the way forward to the front edge - like before. Align the front edge of the TV with the Beolab 7 speaker to make it look like a Beovision 7.
How the Neo 7 Spacer works
The older B&O TV on the Beovision 7 stand was flush with the front edge of the Beolab 7 speaker. Newer TVs are not as deep as the old Beovision 7 TV, so the front edge of the TV does not align with the front edge of the speaker. It’s a matter of taste.
How to choose the right Neo Spacer for your TV on a Beovision 7 stand
If you want it the way it was before, the Neo 7 Spacer is the answer. Now the front edge of the TV aligns with the front edge of the Beolab 7 speaker.
At the same time, you get a cavity behind the TV where cables, Apple TV, and other TV boxes can be hidden. You get a neat setup without cable clutter.
To make sure your TV is upright, use Neo Tilt Stop. Read more here
https://shop.neomesteren.dk/products/neo-7-tilt-stop-beovision-7-40
What are the Spacer dimensions, and how does it fit the Beovision 7 stand?
- This Spacer is designed for a TV with VESA 300 x 200
- VESA measurement of 300 mm in width
- VESA measurement of 200 mm in height
- The depth is 130 mm. It moves the front of the TV 130 mm forward
- The product fits a Beovision 7 stand
- The spacers are available with both 6 mm and 8 mm thread thickness (for Samsung).
- Please note - the spacers have a thread length of 10 mm for M6 and 12 mm for M8 (Samsung). Check that the VESA holes in your TV are not so deep that the thread length causes a problem.
- Longer threads are available on request (contact us). Some Samsung TVs have VESA holes that are very deep inside the cabinet.
How do I choose the right Neo 7 Spacer
VESA is a standard for mounting TVs - but that is where standardization ends. VESA is typically specified as 300 x 200 or 300 x 300. These are the measurements between the holes on the back of the TV where the bracket is attached. Measurements are in millimeters, so VESA 300 x 200 means there are 300 mm between the holes (e.g., horizontally) and 200 mm (e.g., vertically).
But the VESA standard does not specify where the holes are located on the TV. They may be very low (if the TV has electronics at the bottom) or they may be high up.
Get help here finding the right VESA plate
https://neomesteren.dk/saadan-vaelger-du-den-rigtige-vesa-plade
The VESA measurements determine which Spacer you need. Remember to consider how far forward you want the front of your TV to sit. TVs vary in thickness, so our products have different spacing/depths. You should therefore expect the product to bring the TV as close as possible to the front edge of the Beolab 7 speaker.
What’s included with the Neo 7 Spacer
Spacers, a cover plate, and mounting screws for the VESA plate are included - see details above.
