Neo 7 Spacer for Beovision 7

The Neo 7 Spacer brings your new TV all the way to the front edge - like the Beovision. Align the front edge of the TV with the front edge of the Beolab 7 speaker to make it look like Beovision 7.

How the Neo 7 Spacer works

The older B&O TV on the Beovision 7 stand was flush with the front edge of the Beolab 7 speaker. Newer TVs are not as deep as the old Beovision 7 TV, so the front edge of the TV is not flush with the front edge of the speaker. It is a matter of taste.

How to choose the right Neo Spacer for your TV on a Beovision 7 stand

If you want it to look as it did before, the Neo 7 Spacer is the answer. The front edge of the TV is now flush with the front edge of the Beolab 7 speaker.

At the same time, you get a cavity behind the TV where cables, Apple TV, and other TV boxes can be hidden. You get an attractive setup without cable clutter.

If you want to ensure that your TV stands vertically, use Neo Tilt Stop; read more here

https://shop.neomesteren.dk/products/neo-7-tilt-stop-beovision-7-40

What are the dimensions of the Spacer, and how does it fit the Beovision 7 stand?

• This Spacer is intended for a TV with VESA 400 x 300
  
  
• VESA measurement of 400 mm in width
  
  
• VESA measurement of 300 mm in height
  
  
• The depth is 130 mm. It moves the front of the TV 130 mm forward
  
  
• The product fits a Beovision 7 stand
  
  
• The spacers are available with both 6 mm thread thickness and 8 mm (for Samsung)
  
  
• Note - the spacers have a thread length of 10 mm for M6 and 12 mm for M8 (Samsung). Check that the VESA holes in your TV are not so deep that the thread length causes a problem.
  
  
• Longer threads can be requested (contact us). Some Samsung TVs have the VESA holes very deep inside the cabinet.

How do I choose the right Neo 7 Spacer?

VESA is a standard for mounting TVs - but that is where the standardization ends. VESA is typically specified as 300 x 200 or 300 x 300. These are the measurements between the holes on the back of the TV, where the bracket is attached. The measurements are in millimeters, so VESA 300 x 200 means there are 300 mm between the holes (e.g. in width) and 200 mm (e.g. in height).

However, the VESA standard does not specify where the holes are positioned on the TV. They may be very low (if the TV has electronics at the bottom) or they may be high.

You can get help finding the right VESA plate here

How to choose the right VESA plate and Spacer for your TV

The VESA measurements determine which Spacer you need for your Beovision stand. Remember to consider how far forward the front of your TV should be. All TVs have different thicknesses, so our products vary in distance/depth. You should therefore expect the product to come as close as possible to the front edge of the Beolab 7 speaker.

What is included in the package for the Neo 7 Spacer for your Beovision stand

Spacers, a cover plate, and mounting screws for the VESA plate are included - see details above.