Beovision 7 32 VESA mount / plate

This VESA plate or VESA mount is specially designed for installation on a floor stand, wall mount or table stand from Beovision 7-32 or Beovision 6.

The VESA mount fits TVs with both 6 mm and 8 mm screws.

How to attach a VESA mount

Remove the current B&O TV from the Beovision 7 stand by loosening 2 screws. Mount the VESA 200/300 plate (mount) on your TV, then mount the plate with the TV on the stand.

How to install the VESA plate on the BV 7-32 stand - click here

How to choose the right VESA plate - click here

What are the dimensions of the VESA plate / mount for the Beovision 7 stand?

• The VESA plate has 200 and 300 mm hole spacing on the sides and holes designed for screws up to 8 mm (M8) on your TV.
  
  
• The VESA mount also has a vertical spacing of 450 mm, with the holes spaced 25 mm apart.
  
  
• The product is prepared for installation of the Neo 7 Adapter, with holes ready for use.
  
  
• A bag containing the following is included
• 2 M5 (5 mm) screws to install the Neo 7 Adapter on the VESA plate.
• 2 M5 (5 mm) screws to fasten the VESA plate to the B&O stand.
• 4 M6 screws (6 mm), 4 spacers of 10 mm for installation between the TV and the plate.
• 4 M8 screws (8 mm) and 4 spacers of 10 mm for installation between the TV and the plate (used for Samsung TVs)

Attach the Neo 7 Tilt Stop to the stand

The original TV from Bang & Olufsen was perfectly balanced, but modern TVs are not. They often have the electronics at the bottom and therefore weigh more at the bottom of the TV.

This causes your TV to lean or tilt on a Beovision 7 stand, leaving the TV in a non-vertical position.

Use this Neo 7 Tilt Stop to get your TV back into a vertical position.

Neo 7 Tilt Stop is made of plastic and very easy to install. Place your TV in a vertical position and carefully fit the plastic unit between the VESA plate and the Beovision 7 stand.

Buy it here at Neo Shop.