Beovision 7 32 VESA bracket / plate

This VESA plate or VESA bracket is specially designed for mounting on a floor stand, wall mount or table stand from the Beovision 7-32 or Beovision 6.

The VESA bracket fits TVs with both 6 mm and 8 mm screws.

How to attach the VESA bracket

Remove the current B&O TV from the Beovision 7 stand by loosening 2 screws. Mount the VESA 200/300 plate (bracket) on your TV, then mount the plate with the TV on the stand.

How to install the VESA plate on the BV 7-32 stand - click here

How to choose the right VESA plate - click here

What are the dimensions of the VESA plate / bracket for the Beovision 7 stand

• The VESA plate has 200 and 300 mm hole spacing on the sides and has holes designed for screws up to 8 mm (M8) on your TV.

  
  
• The VESA bracket also has a height spacing of 450 mm, with the hole spacing increasing in 25 mm increments.
  
  
• The product is prepared for mounting the Neo 7 Adapter, with holes ready for use.

  
  
• A bag containing
• 2 M5 (5 mm) screws for mounting the Neo 7 Adapter on the VESA plate.

• 2 M5 (5 mm) screws for securing the VESA plate to the B&O stand.
• 4 M6 screws (6 mm), 4 10 mm spacers for mounting between the TV and the plate.
• 4 M8 screws (8 mm) and 4 10 mm spacers for mounting between the TV and the plate (used for Samsung TVs)

Attach the Neo 7 Tilt Stop to the stand

The original TV from Bang & Olufsen was perfectly balanced, but modern TVs are not. They often have the electronics at the bottom and therefore weigh more at the bottom of the TV.

This causes your TV to tip or tilt on a Beovision 7 stand, leaving the TV in a non-vertical position.

Use this Neo 7 Tilt Stop to return your TV to a vertical position.

Neo 7 Tilt Stop is made of plastic and very easy to install. Place your TV in a vertical position and carefully mount the plastic unit between the VESA plate and the Beovision 7 stand.

Buy it here at Neo Shop.